• Bird's Eye view of the engine compartment with a 2.8l
    V6 still in it's stock location.  This is a 4wd frame.
  • NOTE: We no longer offer 4wd kits.
  • Very large gap between the back of the V6 and the front of the
    firewall.  With a V8 you will still have a 4" gap using the stock
    mounting location.  You will need to re-position any motor
    back towards the firewall.  Most aftermarket V8 S10 engine
    swap mounts do not locate the engine correctly for use with a
    1947-55.1 body swap.
  • LS type engine installed about one inch from the firewall.
S10 Frame Swap Engine location
Copyright © 2004-2015 Advanced-Design Engineering